4V - 40V Forward Reverse Controller DC Motor Driver Control Modules for DIY

4V - 40V Forward Reverse Controller DC Motor Driver Control Modules for DIY Toy with Jog Mode, Self-locking Mode

Certification: none

Origin: Mainland China

Model Number: 1005005218989653

Model Number: SD0802-ZF

Description

• Motor Type: for DC Motor

• Model Number: SD0802-ZF

• Features:
  - Low power consumption, module power consumption 0.6W, static 0.1W.
  - Applicable to occasions where the motor control requirements are increased.
  - Active at low level, input is the negative pole of the optocoupler.
  - Through the jumper port, you can select jog mode or self-locking mode.
  - Support DC motor forward, reverse, and automatic control long work time.
  - If the voltage is lower than 2V, it is considered that there is a signal.

• Rated Current: 5A

• Working Voltage: DC 4 - 40V

• Response Speed: K1 K2 is 20ms; SW1 SW2 is 50ms

• Frequently asked questions:
  1. What is the difference between self-locking mode and inching mode?
  - Self-locking mode: press the external forward switch (K1) once, and the motor rotates forward. Release K1, and the motor still rotates forward. It will not stop until it encounters the arcing signal (K2) or forward stop signal (SW1); The reverse is also true.Jog mode: press and hold the external forward switch (K1), the motor rotates forward, and release K1 to stop the motor immediately; The reverse is also true.
  2. What is the signal requirement? Can I connect the sensor?
  - The signal is active at low level, can be connected to three wire sensor(NPN-NO type). K1 K2 SW1 SW2 are all of this standards.
  3. Is the limit signal valid in inching mode?
  - Valid. For example, K1 has a signal and it will turn forward, but SW1 limit also has a signal and it will stop (not turn forward).
  4. What is the limit signal?
  - The limit signal can also be called a stop signal. The limit signal is triggered and the level is enabled. For example, if a short limit signal is encountered during forward rotation, it will stop, even if the limit signal disappears, it will still stop. The forward rotation signal must be renewed before the forward rotation can be resumed.
  5. What is the input and output voltage?
  - The applicable range of input voltage is 4V-40V, but to ensure reliable operation, it is recommended to use it in the range of 6V-36V.
  6. How much motor can be driven?
  - The maximum current of the product at 12V is 20A, and the maximum current is 10A when the service voltage is 24V. The maximum drive motor power generally does not exceed 80W, and it is recommended that the locked rotor of the motor shall prevail.
  7. Can automatic forward and reverse rotation be realized?
  - The product has no timing function, so strictly speaking, it cannot automatically reciprocate. However, in combination with the start switch, the start switch (A) and the end switch (B), infinite reciprocating operation between A and B can be achieved. The connection method is: the start switch and the start switch are connected to K1, the end switch is connected to K2, and the SW1 SW2 is not connected. Note that all switches are normally open.

• Product Weight: 30 G / 1.06 Ounces

• Product Dimensions (L*W*H): 83*46*20 MM / 3.27*1.81*0.79 Inches

• Package Weight: 32.0 G / 1.13 Ounces

• Package Dimensions (L*W*H): 85*50*20 MM / 3.35*1.97*0.79 Inches

• Retail Packaging: Yes, Colored Box

Package include

• Package Including:

• 1 x DC Motor Controller